» Download catalogue 
|
|
|
is SOLAR Più's integrated solar tracking system.
This is an innovative technology that permits substantially
upgrading the performance of any solar
power system, both
photovoltaic (for the production of electricity). Adaptable
to any type of photovoltaic
panel (both in size and weight).
|
of produced energy compared to traditional
systems
|
|
 |
Perfect positioning
The fixed panels mounted on the ground
or on roofs are only perfectly positioned for a few hours
during the course of the day. Our integrated solar tracking
system automatically changes the angle of the solar panels
to favour better irradiation and ensure system optimisation.
2-axis movement
SOLAR + moves automatically on 2 rotation axes, always positioning the solar
panel perpendicular with respect to the sun. This way, average annual increases
in the production of electricity of up to 35% can be obtained. Output increases
even further during reduced-sunlight hours, when traditional systems normally
produce less electricity.
Advantagesof photovoltaic
solar energy
• Clean energy.
• Free energy.
• Production of a much greater quantity of electricity. + 35% compared to traditional
systems.
• In the winter period, the increase is much higher than average with respect
to a traditional system.
An excellent investment
The installation of a solar tracking system permits buying the electricity
to be used in coming decades at a fixed and constant price.
5-year warranty
All Solar+ products are covered by a 5-year warranty, which on request can
be extended to 20 years.
|
|
 |
|
Supervisor Remote Control (Touch Screen LCD 3.8”)
The remote control consists of:
• Micro-controller unit
• 3.8” LCD with “touch screen”
• Non-volatile EEPROM and FLASH memory
• Real Time Clock
• 2 serial interfaces rs232, rs485
• Buffer battery
Each supervisor controls through a circuit communication
maximum 12 routers (144 trackers). This configuration permits
reaching any router even though just one section of the
network is interrupted or short-circuited.
|
• Controls any communication towards a PC and GPRS modem
• Controls the wind alarm, arranging the movement of the
trackers so as to ensure safe operation.
• Update the tracking tables stored in the routers
• Display the data from the anemometer and then start protection
• Display alarms coming from the trackers
• Move any tracker within the circuit
• More any tracker for snow alarm
• Display of tracking data
• Ongoing interrogation with supervisor (slave). This function
allows the slave to take control of the network if the supervisor
(master) stops operating. |
|
Characteristics of the SOLAR+ bi-axial tracker
Each SOLAR + modular tracking system
consists of two to six PV panel carrying bi-axial supports
for a maximum configuration of 12 Pv panels, of a power unit
positioned on a tracker support for controlling the AZIMUT
and TILT actuators, plus a ROUTER control unit that can pilot
up to twelve tracking systems which is configured on an anemometer
for wind alarm.
Characteristics of CONTROLLER
Unit controlling up to a maximum of twelve tracking systems.
It features an EEPROM and FLASH memory, in which the tracking
table is stored. It also features a real time clock, buffer
battery and buzzer.
The router unit can control the weather column.
The unit features two buttons and two LEDs for performing the
following functions:
• Engaging and disengaging the automatic tracking mode of the
connected trackers
• Selecting a specific tracker
• Moving the selected tracker
• Checking the condition of the tracker (checking any alarms) |
 |
foot
for
fastener piercing |
foot
stand
for flat roofs |
12
panels bi-axial tracker |
|
 |
foot
for
fastener piercing |
foot
stand
for flat roofs |
12
panels bi-axial tracker |
| |
CONE SHADOW
|
